Qa/certified Factory Auditor (CFA) - Nhân Viên Kiểm Tra Chất Lượng (10 Người)
Mức lương: 12-15 triệu
Đã hết hạn nộp hồ sơ - 1289 lượt xem
Ngày cập nhật: 18/03/2020
Thông Tin Tuyển Dụng
Mô tả công việc
• Conduct final audits on finished products. All rejected PO’s must be re-audit prior to shipment
• Act as the key person to educate and standardize quality requirements to shop floor.
• Reject orders/goods if they are non-conformance to Buyer’s standard acceptable quality level.
• Conduct daily roving based on the assign Style/PO allocation, ensure major defects are identified during the In-Process checking. Generate daily roving report and submit to relevant persons in charge for acknowledgement.
• Drive continuous improvement specifically on the reduction to defective returns.
• Follow Buyer’s inspection method and how-to-measure procedures.
• Ensure that the product requirements in the AD/BOM, packing and labeling manual are meet.
• Prepare and compile all Final Audit Reports. Collect and record all findings for major defects on the inspection report.
• Generate In-Process inspection report for new in-lined style and conducts quality interactions to QC, Line Leader, Technician and Operators.
• Check if all necessary documents like Trim Cards, Approved sample, AD/BOM, Manufacturing Notice are available in the lines after the Pre-production meeting and prior to changeover.
• Responsible for the regular attendance of pre-production meeting
• Work closely with QC and feedback for all defects seen during In-Process Inspection to be aware and pay much attention during daily Roving.
• Approve all artwork mock-ups and trim card for mass production.
• Approve all sample reference such as PP Samples and Top Samples.
• Send daily and weekly report to Senior QA Supervisor
• Perform other duties as designated by Supervisor.
• Act as the key person to educate and standardize quality requirements to shop floor.
• Reject orders/goods if they are non-conformance to Buyer’s standard acceptable quality level.
• Conduct daily roving based on the assign Style/PO allocation, ensure major defects are identified during the In-Process checking. Generate daily roving report and submit to relevant persons in charge for acknowledgement.
• Drive continuous improvement specifically on the reduction to defective returns.
• Follow Buyer’s inspection method and how-to-measure procedures.
• Ensure that the product requirements in the AD/BOM, packing and labeling manual are meet.
• Prepare and compile all Final Audit Reports. Collect and record all findings for major defects on the inspection report.
• Generate In-Process inspection report for new in-lined style and conducts quality interactions to QC, Line Leader, Technician and Operators.
• Check if all necessary documents like Trim Cards, Approved sample, AD/BOM, Manufacturing Notice are available in the lines after the Pre-production meeting and prior to changeover.
• Responsible for the regular attendance of pre-production meeting
• Work closely with QC and feedback for all defects seen during In-Process Inspection to be aware and pay much attention during daily Roving.
• Approve all artwork mock-ups and trim card for mass production.
• Approve all sample reference such as PP Samples and Top Samples.
• Send daily and weekly report to Senior QA Supervisor
• Perform other duties as designated by Supervisor.
Yêu cầu ứng viên
• Graduated from University, college
• Language: English is required (Listening, Speaking, Reading, Writing)
• Experience and having Adidas CFA certificate is preferable (Candidate without working experience will be trained after hiring)
• Well organized, accurate, good communication skill and able to work independently
• Language: English is required (Listening, Speaking, Reading, Writing)
• Experience and having Adidas CFA certificate is preferable (Candidate without working experience will be trained after hiring)
• Well organized, accurate, good communication skill and able to work independently
Quyền lợi được hưởng
- Các khoản trợ cấp: Kết hôn, tang chế, ốm đau, thai sản, cơm trưa, điện thoại, xăng xe, công tác...
- Ký HĐLĐ, BH và các chế độ khác của công ty
- Tổ chức du lịch hàng năm
- Ký HĐLĐ, BH và các chế độ khác của công ty
- Tổ chức du lịch hàng năm
Cách thức ứng tuyển
Hồ sơ theo yêu cầu của nhà tuyển dụng khi liên hệ trực tiếp
Giới thiệu về công ty

CÔNG TY TNHH GREENTECH HEADGEAR
Người liên hệ: Bộ phận Tuyển dụng
Người liên hệ: Bộ phận Tuyển dụng
Thành lập tại Việt Nam từ 2018. Công ty chúng tôi là đơn vị 100% vốn đầu tư từ Đài Loan Trung Quốc chuyên sản xuất, gia công các loại mũ nón, bao tay, vớ, cà vạt, trang phục và phụ liệu trang phục cho các thương hiệu lớn. Trụ ...Chi tiết
Thành lập tại Việt Nam từ 2018. Công ty chúng tôi là đơn vị 100% vốn đầu tư từ Đài Loan Trung Quốc chuyên sản xuất, gia công các loại mũ nón, bao tay, vớ, cà vạt, trang phục và phụ liệu trang phục cho các thương hiệu lớn. Trụ sở chính tọa lạc tại: Đường D02, Khu công nghiệp Châu Đức, Xã Nghĩa Thành, Huyện Châu Đức, Tỉnh Bà Rịa - Vũng Tàu, Việt Nam. Chi nhánh 1: Nhà xưởng số 3, 4, 5, 6, 22, 23, đường số 3, KCN Nhơn Trạch 2 - Nhơn Phú, Xã Phú Hội, Huyện Nhơn Trạch, Tỉnh Đồng Nai, Việt Nam Chi nhánh 2: Nhà xưởng số 1,2, đường số 3, KCN Nhơn Trạch 2 - Nhơn Phú, Xã Phú Hội, Huyện Nhơn Trạch, Tỉnh Đồng Nai, Việt Nam Ẩn chi tiết
Bạn đang xem tin việc làm Qa/certified Factory Auditor (CFA) - Nhân Viên Kiểm Tra Chất Lượng (10 Người) trong ngành được tuyển dụng tại bởi CÔNG TY TNHH GREENTECH HEADGEAR. CÔNG TY TNHH GREENTECH HEADGEAR đang cần tuyển 0 người nhân sự với hình thức làm việc: Toàn thời gian cố định. Yêu cầu kinh nghiệm Không yêu cầu. Website tìm việc làm timviec24h.vn cập nhật tin Qa/certified Factory Auditor (CFA) - Nhân Viên Kiểm Tra Chất Lượng (10 Người) cách đây lúc 16/04/2020 00:00:00. Người tìm việc lưu ý không nên đặt tiền cọc khi xin việc . Chúng tôi luôn cố gắng đưa tin tức tuyển dụng nhanh và chính xác nhất cho bạn.
CÔNG TY TNHH GREENTECH HEADGEAR
Địa chỉ:
Quy mô: Đang cập nhật