Design Engineer
Mức lương: Thỏa thuận
Đã hết hạn nộp hồ sơ - 204 lượt xem
Ngày cập nhật: 04/04/2020
Thông Tin Tuyển Dụng
Hình thức làm việc: Toàn thời gian
Chức vụ: Nhân viên
Ngành nghề: Nghệ thuật/Điện ảnh, Cơ khí/Chế tạo/Tự động hóa
Mô tả công việc
Position Summary
• The jobholder is to be responsible for the design of all drawings in MHE-Demag Viet Nam, as a Design Engineer, the job holder has to do all the design as assigned by Sales/Service Engineers or Managers from time to time. Various types of drawings will be prepared ranging from layout for approval, manufacturing to final assembly drawings. On completion of all the drawing tasks, the job holder will have to check them, signed by the person who assigned the jobs and finally pass on to his Manager for final approval. The job holder will also create drawing lists and has to ensure that the drawings are organized properly and clarify technical questions with the workshop and sub-contractors.
Functional Role
• Execute the design by preparing the layout drawings for approval; draught and enhance design drawings for manufacturing; design involving all standard and non-standard drawings for required products as per requirement and to ensure that all design works finish according to the time schedule;
• Ensure selection of materials, crane design, dimensions and design criteria comply with technical specifications such as drafting and design codes and other customer's requirements so as to ensure that layout drawings of standard and non standard cranes are consistent and accurate.
• Attend he site meetings when necessary and to render the technical support services within job requirement;
• Establish the drawing lists for the jobs done & compile and print out drawings required;
• Any other duties as assigned by Manager from time to time.
• In-house Project execution
a) Project Schedule:
Monitor/ update/ control base of delivery schedule
Any revision, resubmit to Project Engineers
b) Bill of Material:
Check correct sizing of component (i.e. winches, Travel Drive, Wheel Block etc)
Generate Mechanical via “SAP”. Submit to Material Dept for purchase and issue
Monitor Status
c) Manufacturing:
Getting Approval Drawing (on approval by client) from local Project Engineer and hand-over to Design Drawing Department for Manufacturing Drawing
On receipt of Manufacturing, check to ensure correctness of Component used etc. before submit for production
d) Component Status: Monitor component status from suppliers, for both overseas and local purchases.
e) Sub-contract:
Initiate quotation, listing down the scope of work.
Provide schedule and scope of work for sub-contract.
Ensure quality of sub-contract work is according to drawing Technical clarification/ scope of work provided by MHE-Demag
f) Cost Control:
Use SAP to generate costing sheet as detail as possible.
Ensure project Execution within cost allocated
Discuss with Sales on the cost provision if could not be met
g) Delivery:
Arrange and Monitor delivery ex-work factory
Inform local Project Engineers if deadlines cannot be met
h) Handover Document: Ensure Operation and Maintenance Manual are prepared and send together with the machines.
i) Filing: Each Project to be filed by itself in the Project files.
Other functions:
Provide training on product knowledge, technical and/or costing when required.
• The jobholder is to be responsible for the design of all drawings in MHE-Demag Viet Nam, as a Design Engineer, the job holder has to do all the design as assigned by Sales/Service Engineers or Managers from time to time. Various types of drawings will be prepared ranging from layout for approval, manufacturing to final assembly drawings. On completion of all the drawing tasks, the job holder will have to check them, signed by the person who assigned the jobs and finally pass on to his Manager for final approval. The job holder will also create drawing lists and has to ensure that the drawings are organized properly and clarify technical questions with the workshop and sub-contractors.
Functional Role
• Execute the design by preparing the layout drawings for approval; draught and enhance design drawings for manufacturing; design involving all standard and non-standard drawings for required products as per requirement and to ensure that all design works finish according to the time schedule;
• Ensure selection of materials, crane design, dimensions and design criteria comply with technical specifications such as drafting and design codes and other customer's requirements so as to ensure that layout drawings of standard and non standard cranes are consistent and accurate.
• Attend he site meetings when necessary and to render the technical support services within job requirement;
• Establish the drawing lists for the jobs done & compile and print out drawings required;
• Any other duties as assigned by Manager from time to time.
• In-house Project execution
a) Project Schedule:
Monitor/ update/ control base of delivery schedule
Any revision, resubmit to Project Engineers
b) Bill of Material:
Check correct sizing of component (i.e. winches, Travel Drive, Wheel Block etc)
Generate Mechanical via “SAP”. Submit to Material Dept for purchase and issue
Monitor Status
c) Manufacturing:
Getting Approval Drawing (on approval by client) from local Project Engineer and hand-over to Design Drawing Department for Manufacturing Drawing
On receipt of Manufacturing, check to ensure correctness of Component used etc. before submit for production
d) Component Status: Monitor component status from suppliers, for both overseas and local purchases.
e) Sub-contract:
Initiate quotation, listing down the scope of work.
Provide schedule and scope of work for sub-contract.
Ensure quality of sub-contract work is according to drawing Technical clarification/ scope of work provided by MHE-Demag
f) Cost Control:
Use SAP to generate costing sheet as detail as possible.
Ensure project Execution within cost allocated
Discuss with Sales on the cost provision if could not be met
g) Delivery:
Arrange and Monitor delivery ex-work factory
Inform local Project Engineers if deadlines cannot be met
h) Handover Document: Ensure Operation and Maintenance Manual are prepared and send together with the machines.
i) Filing: Each Project to be filed by itself in the Project files.
Other functions:
Provide training on product knowledge, technical and/or costing when required.
Yêu cầu ứng viên
Skills, Knowledge & Competencies Proficiency Level
• Microsoft Windows XP, VISTA & WIN 7 Microsoft Office (Word, PowerPoint, Excel)
• SolidWorks
• AutoCad
• Applying Expertise and Technology
• Learning and Researching
Academic Qualifications: Bachelor's degree in Mechanical Engineering or related field..
Professional Experience: At least 3 years’ structural design experience in Industrial Products.
• Microsoft Windows XP, VISTA & WIN 7 Microsoft Office (Word, PowerPoint, Excel)
• SolidWorks
• AutoCad
• Applying Expertise and Technology
• Learning and Researching
Academic Qualifications: Bachelor's degree in Mechanical Engineering or related field..
Professional Experience: At least 3 years’ structural design experience in Industrial Products.
Quyền lợi được hưởng
- 05 working days per week
- Good training program for career development
- Professional working environment
- Good training program for career development
- Professional working environment
Cách thức ứng tuyển
Hồ sơ theo yêu cầu của nhà tuyển dụng khi liên hệ trực tiếp
Giới thiệu về công ty
MHE - DEMAG VIETNAM CO LTD
15 Street 2, Vietnam Singapore Industrial Park, Thuan An, Binh Duong
Người liên hệ: Xuân Hoa
15 Street 2, Vietnam Singapore Industrial Park, Thuan An, Binh Duong
Người liên hệ: Xuân Hoa
MHE-Demag is a global market leader for material handling equipment. We are a joint venture between Jebsen & Jessen (SEA) Pte Ltd and Demag Cranes & Components GmbH. Our main products are: Crane & Components (Electric Overhead Travelling Crane, Engineered Gantry Crane, Slewing Jib Crane, Wire-Rope & Chain Hoist); Industrial ...Chi tiết
MHE-Demag is a global market leader for material handling equipment. We are a joint venture between Jebsen & Jessen (SEA) Pte Ltd and Demag Cranes & Components GmbH. Our main products are: Crane & Components (Electric Overhead Travelling Crane, Engineered Gantry Crane, Slewing Jib Crane, Wire-Rope & Chain Hoist); Industrial Product (Dock Leveler; Goods Lift; Car Park System;Gondola /Building Maintenance Unit; Warehouse Trucks); Service, Parts & Refurbishment. Our company website is : www.mhe-demag.com We are seeking the qualified candidates for above position: Ẩn chi tiết
Bạn đang xem tin việc làm Design Engineer trong ngành Nghệ thuật/Điện ảnh được tuyển dụng tại Hồ Chí Minh bởi MHE - DEMAG VIETNAM CO LTD. MHE - DEMAG VIETNAM CO LTD đang cần tuyển 0 người nhân sự với hình thức làm việc: Toàn thời gian cố định. Yêu cầu kinh nghiệm Không yêu cầu. Website tìm việc làm timviec24h.vn cập nhật tin Design Engineer cách đây lúc 01/05/2020 00:00:00. Người tìm việc lưu ý không nên đặt tiền cọc khi xin việc . Chúng tôi luôn cố gắng đưa tin tức tuyển dụng nhanh và chính xác nhất cho bạn.
MHE - DEMAG VIETNAM CO LTD
Địa chỉ: 15 Street 2, Vietnam Singapore Industrial Park, Thuan An, Binh Duong
Quy mô: 25-99 nhân viên